SCART 2 JAMMA - Multi Console Arcade Driver

SCART 2 JAMMA - Arcade Driver

This is an RGB video and audio amplifier designed specially for connecting a game console to a JAMMA machine.

this board can be used in conjunction with the JAMMA-Prog board for a Jamma card Edge connection.

Board size is 120 x 112 mm.

Features:

- Power full 6W per channel, stereo audio amplifier. Support three speaker configuration: Jamma mono, MVS (3 wires), direct connection via screw terminals.

- Separate line level input and output 3.5mm connections

- High slew rate video amplifier which contains a DC restoration circuit.

- Video gain fixed at 5.5 (output 3.9 Vpp with 0.2 volt DC offset)

- Sync separator

- Protection from sync signal above standard greater than 15.7 kHz (can be disable)

- Has resistors to load rail and stabilise old power supplies.

Contains:

- 1 x SCART2JAMMA assembled board

- 1 x 150mm long cable for header J8 (power/speaker)

- 1 x 200mm cable for header J2 (video output)

- 4 x PCB feet and screws

Instruction can be donwloaded at bottom's page.